Tungaloy
Produkte filtern
Ihre Suche ergab keine Treffer. Bitte passen Sie Ihren Text an oder scrollen Sie durch die Filteroptionen, um die passende Option zu finden.
465 Artikel gefunden
Produktanzeige:
EXN03R028M25.0-04|Tungaloy
Super high feed milling endmills with double sided inserts with 4 edges (Center-through coolant)
The standard cutting conditions table shows the conditions for standard shank type cutters.@Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.@For DCX above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.
HXN02R008MS05-01|Tungaloy
High feed endmill, modular type with TungMeister connection, with 4-corner double sided inserts
HXWX03M030SM12R04|Tungaloy
High feed milling endmill, modular type (TungFlex), with 6-corner double sided inserts
HXWX03M025SM12R04|Tungaloy
High feed milling endmill, modular type (TungFlex), with 6-corner double sided inserts
SWMT1506UER-MM AH3135|Tungaloy
Single-sided square insert with MM chipbreaker for general purpose use. Low entering angle type. Suitable for difficult-to-machine materials.
EXN06R032M32.0-02|Tungaloy
Super high feed milling endmills with double sided inserts with 4 edges
The standard cutting conditions table shows the conditions for standard shank type cutters.@Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.
HXLN05M025M12R02|Tungaloy
Radius cutter with double-sided insert; Modular head with TungFlex threaded adaptation
When using a long shank or modular head with long overhang, lower the cutting conditions (Vc, fz, ap) to 70% of the maximam conditions for the standard shank.
EXLN04M032C32.0R05L|Tungaloy
Radius cutter with double-sided insert; Shank type
When using a long shank or modular head with long overhang, lower the cutting conditions (Vc, fz, ap) to 70% of the maximam conditions for the standard shank.
SWMT1506ZER-MT AH3135|Tungaloy
Single-sided square insert with MT chipbreaker. Strong cutting edge type.
HXWX03M040SM16R06|Tungaloy
High feed milling endmill, modular type (TungFlex), with 6-corner double sided inserts
EXN03R025M25.0-04L-C|Tungaloy
Super high feed milling endmills with double sided inserts with 4 edges (Coolant direct to inserts)
The standard cutting conditions table shows the conditions for standard shank type cutters.@Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.@For DCX above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.
EXN03R032M32.0-06-C|Tungaloy
Super high feed milling endmills with double sided inserts with 4 edges (Coolant direct to inserts)
The standard cutting conditions table shows the conditions for standard shank type cutters.@Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.@For DCX above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.
HXLS02M012M06R03|Tungaloy
High feed milling cutters with LSMT inserts; Modular heads with TungFlex threaded adaptation
EXN03R025M25.0-04|Tungaloy
Super high feed milling endmills with double sided inserts with 4 edges (Center-through coolant)
The standard cutting conditions table shows the conditions for standard shank type cutters.@Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.@For DCX above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.
LNMU0303UER-ML AH8015|Tungaloy
Double sided insert with 4 edges and ML chipbreaker for low cutting force, low approach angle type.